起伏海面的雷电电磁场传播特征及其对闪电定位精度的影响     

张源源  庞华基  刘钊  宋琳  邓猛 《海洋科学》2020,44(5):34-41

为了研究起伏海面对雷电电磁传播的影响,本文利用Barrick表面阻抗理论和Wait近似算法,采用改进二维分形海面模型模拟起伏海面,利用数值模式,分析起伏海面的雷电电磁传播特征,并进一步讨论了起伏海面对时差法闪电定位系统定位精度的影响。结果表明:起伏海面对垂直电场和磁场的峰值的影响不显著,但会引起波形的上升期时间的延长,浪高越大,影响越明显;随着观测距离的增加,雷电垂直电场波形的上升时间逐渐变长;风速的变化与雷电垂直电场波形的上升时间成正比;由于海面起伏引起雷电电磁场波形在传播中的变化会影响基于时差法闪电定位系统的定位精度,定位误差可达几至十几公里。  相似文献   

无人船运动控制方法综述   总被引：1，自引：1，他引：0  

裴志远  戴永寿  李立刚  金久才  邵峰 《海洋科学》2020,44(3):153-162

为实现无人船海上自主作业,无人船运动控制的快速性、准确性以及鲁棒性亟待提高。首先从全驱动控制和欠驱动控制角度,分别概括了国内外无人船航向控制、航速控制、轨迹跟踪控制以及路径跟踪控制的主流控制方法。其次,归纳总结了处理海洋环境不确定扰动的研究进展,包括扰动的建模和消除、抑制扰动的主流方法。最后,总结了无人船运动控制现状与存在的问题,并从工程应用和理论研究两个角度对未来的研究方向进行了展望。  相似文献   

基于核函数NPSSB模型的HY-2A卫星雷达高度计海况偏差研究     

张洁  田杰  王兆徽 《海洋预报》2020,37(1):1-10

利用机器学习的方法,对14个周期HY-2A卫星高度计数据:风速、有效波高和海面高度差值进行训练,探究海况偏差和风速、有效波高之间的关系,创建海况偏差核函数非参数模型(NPSSB),并与参数模型中具有代表性的BM3、BM4模型进行对比。研究表明:(1)核函数NPSSB模型能够很好的反映SSB与U、SWH之间的关系,SSB与U呈二次函数关系,SSB与SWH呈反比例函数关系;(2)核函数NPSSB模型对SSB的模拟能力与训练数据集相关,数据量越多,模拟能力越好;(3)核函数NPSSB模型与BM3、BM4模型都存在0^-0.03 m的差值,随着风速和有效波高的增加,差值的绝对值越大。  相似文献   

北京地区Landsat 8 OLI高空间分辨率气溶胶光学厚度反演   总被引：3，自引：0，他引：3  

田信鹏  孙林  刘强  李秀红 《遥感学报》2018,22(1):51-63

卫星气溶胶光学厚度(AOD)反演中,传统暗目标方法在反射率较低的水体、浓密植被覆盖区域取得了较好效果,在反射率较高且结构复杂的高反射地表上空目前多采用深蓝算法,但存在空间分辨率较低,对细节分布描述性较差等问题。为解决这一问题,本文首先以5年(2008年—2012年)长时间序列MODIS地表反射率产品为基础,采用最小值合成法建立500 m分辨率逐月地表反射率产品数据集,然后利用地物波谱库中典型地物波谱数据,分析建立MODIS与Landsat 8 OLI传感器蓝光波段反射率转换模型,最后北京地区AERONET地基观测数据确定了气溶胶光学物理参数,并反演获取了北京地区上空500 m分辨率的AOD分布。为验证反演算法的精度,分别将反演结果同AERONET及MODIS/Terra气溶胶产品(MOD04)进行交叉对比,同时利用相关系数R,均方根误差RMSE,平均绝对误差MAE以及MODIS AOD产品预期误差EE共4个指标进行衡量。结果表明:算法反演获取的AOD与AERONET观测值具有较高的一致性,各指标分别为R=0.963,RMSE=0.156,MAE=0.097,EE=85.3%,稍优于MOD04产品(R=0.962,RMSE=0.158,MAE=0.101,EE=75.8%),并且有效的对比点数也高于MOD04。通过与地基观测相比,卫星遥感获取的高分辨率城市地区AOD精度可作为定量评估城市空气质量的有效依据。  相似文献   

2-D delineation of individual citrus trees from UAV-based dense photogrammetric surface models   总被引：1，自引：0，他引：1  

Ali Ozgun Ok  Asli Ozdarici-Ok 《International Journal of Digital Earth》2018,11(6):583-608

One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures.  相似文献   

藏北高原地区地表辐射出支和能量平衡的季节变化   总被引：15，自引：5，他引：10  

马伟强  马耀明  李茂善  Z.   《冰川冻土》2005,27(5):673-679

对青藏高原地区地表能量的研究是一个十分重要的问题.基于中日合作项目"全球协调加强观测计划之亚澳季风青藏高原试验"(CAMP/Tibet)在2001年8月至2002年9月的观测数据资料,分析研究了青藏高原藏北地区地表能量,即净辐射通量、感热通量、潜热通量和土壤热通量等的变化规律,获得了有关藏北高原地表能量的新认识.  相似文献   

Geometric-constrained multi-view image matching method based on semi-global optimization     

Wenhao Zhao  Li Yan 《地球空间信息科学学报》2018,21(2):115-126

Targeting at a reliable image matching of multiple remote sensing images for the generation of digital surface models, this paper presents a geometric-constrained multi-view image matching method, based on an energy minimization framework. By employing a geometrical constraint, the cost value of the energy function was calculated from multiple images, and the cost value was aggregated in an image space using a semi-global optimization approach. A homography transform parameter calculation method is proposed for fast calculation of projection pixel on each image when calculating cost values. It is based on the known interior orientation parameters, exterior orientation parameters, and a given elevation value. For an efficient and reliable processing of multiple remote sensing images, the proposed matching method was performed via a coarse-to-fine strategy through image pyramid. Three sets of airborne remote sensing images were used to evaluate the performance of the proposed method. Results reveal that the multi-view image matching can improve matching reliability. Moreover, the experimental results show that the proposed method performs better than traditional methods.  相似文献   

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000     

U. G. Sefercik  S. Karakis  C. Atalay  I. Yigit  U. Gokmen 《国际地球制图》2018,33(10):1139-1154

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.  相似文献   

车载激光扫描数据分类支持下的路面数据提取   总被引：1，自引：0，他引：1  

吴学群  宁津生  杨芳 《测绘通报》2018,(2):107-110,135

车载激光扫描系统可以快速采集道路及两旁的建筑物、植被、电杆等地物的点云数据,而点云数据的分类提取是车载激光扫描系统应用的关键。本文选用全景激光移动测量系统获取的激光点云数据,分析了路面点云数据的特征,采用渐进格网法进行了路面点云数据的提取研究;通过试验区的实例验证,取得了较好的分类效果。  相似文献   

无人机遥感真正射影像高精度制图     

刘宇  郑新奇  艾刚 《测绘通报》2018,(2):83-88

近年来无人机低空遥感技术不断发展,利用无人机影像生成的真正射影像（TDOM）在成图精度、制作流程方面仍有提高的空间。本文采用固定翼无人机和专业摄影相机采集影像,布设地面控制点,提出了利用运动恢复结构（SfM）和多视立体视觉（MVS）工作流来生成高精度数字表面模型（DSM）和数字正射影像（DOM）的方法;对遮蔽倾斜部分进行阴影检测、DSM修编和多视影像纹理补偿生成TDOM;最后用TDOM上随机分布的检查点进行精度检查,水平精度为3.3 cm,垂直精度为7.5 cm;消除了DOM中倾斜和阴影部分,使建筑物保持垂直视角,生成的满足1：500比例尺高精度并消除倾斜阴影的TDOM可用于农村宅基地确权、国土规划设计等领域。  相似文献